================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例配置系统时钟为HSE，并通过MCO（PA08）引脚输出。

Function descriptions:
This sample configures the system clock to use the HSE (High-Speed External) 
clock source and outputs it through the MCO (PA08) pin.
================================================================================
测试环境：
测试用板：PY32E407_STK
MDK版本： 5.28
IAR版本： 9.20
GCC版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32E407_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行；
2. 按下用户按键；
3. 使用示波器监测PA08引脚上的频率，观察是否与HSE频率一致；

Example execution steps:
1. Compile and download the program to the MCU and run it;
2. Press the user button;
3. Use an oscilloscope to monitor the frequency on the PA08 pin and check if 
it matches the HSE frequency.
================================================================================
注意事项：

Notes:

================================================================================